Posted on on adnano.co.
In this tutorial we'll be installing Alpine Linux with full-disk encryption.
First, you'll need to download Alpine Linux and create bootable media.
Alpine Linux downloads
sha256sum -c alpine.iso.sha256 dd if=alpine.iso of=/dev/sdx # sdx is the bootable media device
Boot from the bootable media. Login as the user 'root' and run the setup script.
When prompted for a disk to use, choose 'none'. We'll be setting up disks manually.
This tutorial will use the device /dev/nvme0n1, which is an NVME device.
We will use fdisk to partition the disk.
Type m to see the available commands.
We need to create two partitions:
- The boot partition, 100MiB in size.
- The root partition, taking up the remainder of available space.
Type o to create a new DOS partition table.
For the boot partition, type n to create a new partition, choose p for primary partition and 1 for the partition number, leave the first sector as is, and choose +100M for the last sector.
Type a and choose partion number 1 to make the boot partition bootable.
For the root partition, type n to create a new partition, choose p for primary partition and 2 for the partition number, leave the first sector as is, and leave the last sector as is. The root partition should take up the remainder of the available disk space.
Type p to verify that you made the correct changes.
Type w to write the changes to disk and exit.
We will only be encrypting the root partition. The boot partition must be unencrypted so that we can boot from it.
First install the required packages.
apk add cryptsetup e2fsprogs
Now create the boot partition filesystem.
If using BIOS:
If using UEFI:
Now encrypt the root partition.
cryptsetup luksFormat /dev/nvme0n1p2
This will encrypt the second partition of the NVME device. It will prompt you for a password to use.
Tip: to view long help messages, pipe the output into less:
cryptsetup --help | less
Now open the parition and give it to a memorable name:
cryptsetup open /dev/nvme0n1p2 cryptroot
The encrypted device will now be available as /dev/mapper/cryptroot.
Now make an ext4 filesystem on the root partition.
First, install the required packages:
apk add syslinux
Mount the encrypted root on /mnt.
mount /dev/mapper/cryptroot /mnt
Mount the boot partition.
mkdir /mnt/boot mount /dev/nvme0n1p1 /mnt/boot
Install Alpine Linux to disk.
Create the file /mnt/etc/crypttab and map the device to the name 'cryptroot'.
cryptroot UUID=<UUID> none luks
Tip: you can store the UUID with:
blkid -s UUID -o value /dev/sda2 > uuid
And load it from within vi with:
Change the value of 'root' to /dev/mapper/cryptroot.
Specify the cryptroot and cryptdm options. In cryptroot, specify the UUID of the device root. In cryptdm, specify the name we mapped the device to, which was cryptroot.
While you are at it you can remove 'nomodeset' from default_kernel_opts if you want to enable graphics later on.
# ... default_kernel_opts="quiet rootfstype=ext4 cryptroot=UUID=<UUID> cryptdm=cryptroot" root=/dev/mapper/cryptroot
Chroot into the root filesystem and run update-extlinux.
chroot /mnt update-extlinux exit
Modify the mkinitfs.conf file and add the following features.
kms is for Kernel Mode Setting, which is needed for graphics to work properly later on.
nvme is required to allow booting from an NVME device.
cryptsetup is required to boot from an encrypted partition.
features="... kms nvme cryptsetup"
Now rebuild the initramfs.
mkinitfs -c /mnt/etc/mkinitfs/mkinitfs.conf -b /mnt $(ls /mnt/lib/modules)
We are almost done. Just a few more steps to make things bootable.
If we were booting using BIOS and MBR, only one more step would be needed, which would be to write the master boot record:
dd if=/usr/share/syslinux/mbr.bin of=/dev/nvme0n1
Unfortunately with UEFI things are slightly more complicated.
Make a 'syslinux' directory in the boot partition.
Copy syslinux files to the syslinux directory.
mkdir /mnt/boot/syslinux cp /usr/share/syslinux/efi64/* /mnt/boot/syslinux/
Copy extlinux.conf to the syslinux directory.
cp /mnt/boot/extlinux.conf /mnt/boot/syslinux/syslinux.cfg
Edit the syslinux.cfg file and prepend vmlinuz-lts and initramfs-lts with a forward slash.
You'll have to do this every time update-extlinux is run.
Now add an entry to your UEFI boot system.
apk add efibootmgr efibootmgr --create --disk /dev/nvme0n1 --part 1 --loader "/syslinux/syslinux.efi" --label "Linux" --edd 3 # Shorter version: efibootmgr -c -d /dev/nvme0n1 -p 1 -l "/syslinux/syslinux.efi" -L "Linux" -e 3
We specify --edd 3 because efibootmgr sometimes fails to detect EDD 3.0.
Unmount all filesystems and reboot from hard disk.
If everything worked properly, then you should be prompted for your password to unlock the root filesystem.
umount /mnt/boot umount /mnt reboot
And now you have successfully installed Alpine Linux.
Should anything go wrong, you can boot from the bootable media and remount the filesystems.
apk add cryptsetup cryptsetup open /dev/nvme0n1p2 cryptroot mount /dev/mapper/cryptroot /mnt mount /dev/nvme0n1p1 /mnt/boot
This work is licensed under a CC-BY-SA-4.0 license.
Have a comment on one of my posts? Send an email